1. Forum
  2. Fidonet
  3. AFTERSHOCK

  • MD5

    From Rick Smith@1:105/10 to All on Wed Apr 12 07:05:56 2023
    Greetings All!

    If this has been covered previously I apologize, I was finally able to purchase aftershock and trying to give it a go here this morning. When I poll my uplink I get "Remote rejected provided password you must support MD5" Now I know the password is correct, and I do have binkd on my system using md5 does aftershock have a place for me to enable that and I missed it, or?



    ----
    Regards,


    Rick Smith (Nitro)

    ... There's more to BBSing than meets the modem.
    --- GoldED+/LNX 1.1.5-b20220504
    * Origin: ----> Abacus BBS! --->>>>bbs.abon.us:2323 (1:105/10)
  • From Alan Ianson@1:153/757 to Rick Smith on Wed Apr 12 09:29:54 2023
    If this has been covered previously I apologize, I was finally able to purchase aftershock and trying to give it a go here this morning. When I poll my uplink I get "Remote rejected provided password you must support MD5" Now I know the password is correct, and I do have binkd on my system using md5 does aftershock have a place for me to enable that and I missed it, or?

    It sounds like your uplink is forcing MD5 connections. I don't think AfterShock supports MD5 currently.

    Are you running the system your AfterShock is connecting to?

    If it's a Mystic System set MD5 to no, or yes but not forced.

    If it's a binkd system don't start binkd with -md5 but use that on the node lines when you know MD5 is supported.

    It's a bad idea to force MD5 since it's not supported by all mailers.

    --- BBBS/Li6 v4.10 Toy-6
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Rick Smith@1:105/10 to Alan Ianson on Fri Apr 14 05:37:06 2023
    Greetings Alan!

    Wednesday April 12 2023 09:29, you wrote to me about an urgent matter!:

    If this has been covered previously I apologize, I was finally able
    to purchase aftershock and trying to give it a go here this morning.
    When I poll my uplink I get "Remote rejected provided password you
    must support MD5" Now I know the password is correct, and I do have
    binkd on my system using md5 does aftershock have a place for me to
    enable that and I missed it, or?

    It sounds like your uplink is forcing MD5 connections. I don't think AfterShock supports MD5 currently.

    Are you running the system your AfterShock is connecting to?

    If it's a Mystic System set MD5 to no, or yes but not forced.

    If it's a binkd system don't start binkd with -md5 but use that on the node lines when you know MD5 is supported.

    I switched it off and now aftershock connects just fine.. Will now see if I can get it to pass mail back and fourth

    ----
    Regards,


    Rick Smith (Nitro)

    ... Wildcat! is to BBSing what an Etch-a-sketch is to ART!
    --- GoldED+/LNX 1.1.5-b20220504
    * Origin: ----> Abacus BBS! --->>>>bbs.abon.us:2323 (1:105/10)