From Newsgroup: comp.sys.apple2

What is Fanuc PMC Eprom Convert Tool and How to Use It?
Fanuc PMC Eprom Convert Tool is a software program that allows you to convert the data stored in the Programmable Machine Control (PMC) system of your Fanuc CNC machine from one model to another. This can be useful when you want to upgrade your CNC system to the Fanuc 0 series, which is one of the most advanced and versatile CNC systems in the industry.
fanuc pmc eprom convert tool
Download Zip https://t.co/QaVd5UQVRN
The PMC system is responsible for controlling the logic and sequence of your machine operations. It uses eproms, which are memory chips that can store data even when the power is off. The data stored in the eproms includes ladder programs, parameter programs, message data, system parameters, and macro programs.
The Fanuc PMC Eprom Convert Tool can read and write the data from your eproms using a special cable that connects your PC to your CNC machine. It can also check and verify your data before and after conversion, and backup and restore your data in case of any problems.
In this article, we will show you what types of data can be converted with Fanuc PMC Eprom Convert Tool, what models are supported by Fanuc PMC Eprom Convert Tool, and how to use Fanuc PMC Eprom Convert Tool step by step.
What types of data can be converted with Fanuc PMC Eprom Convert Tool?
The Fanuc PMC Eprom Convert Tool can convert various types of data stored in your PMC system, such as:
Ladder programs: These are the programs that control the logic and sequence of your machine operations. They are written in a graphical language that resembles a ladder diagram.
Parameter programs: These are the programs that define the parameters of your machine operations, such as speed, feed rate, position, etc.
Message data: These are the messages that appear on your CNC display or monitor, such as alarms, warnings, instructions, etc.
System parameters: These are the parameters that define the settings of your CNC system, such as language, units, mode, etc.
Macro programs: These are the programs that perform complex calculations or operations based on variables or expressions.
The tool can convert all of these types of data from one PMC model to another. However, some types of data may not be compatible or valid for certain models. The tool can detect and report any errors or warnings that may occur during or after conversion.
What models are supported by Fanuc PMC Eprom Convert Tool?
The Fanuc PMC Eprom Convert Tool supports various models of Fanuc CNC machines with PMC systems. However, not all models are supported for both source and destination models. The following table shows the supported models for each direction:
Source modelDestination model
PMC-SB7 (ladder program except for step sequence program)PMC-SD7
PMC-SD7PMC-SB7 (ladder program except for step sequence program)
Fanuc 0AFanuc 0B/0C/0D/0E/0F
Fanuc 0B/0C/0D/0E/0FFanuc 0A
Fanuc 3/6/9 series packageFanuc 15 series package
Fanuc 15 series packageFanuc 3/6/9 series package
Fanuc 16/18/20/21 series packageFanuc 10/11/12 series package
Fanuc 10/11/12 series packageFanuc 16/18/20/21 series package
The tool can also support different types of eproms for each model. For example, for Fanuc 0A model, the tool can support eprom type 2764 or 27256. For Fanuc 0B/0C/0D/0E/0F model, the tool can support eprom type 27256 only.
How to use Fanuc PMC Eprom Convert Tool?
To use the Fanuc PMC Eprom Convert Tool to convert your PMC data for Fanuc 0 series, you will need to follow these steps:
Prepare your PC and CNC machine: Make sure that your PC meets the minimum requirements for running the software. You will need a PC/AT-compatible computer running Microsoft Windows with a CD-ROM drive for installation. It is also recommended that you have FANUC LADDER-IIIC installed on your PC for editing or viewing your ladder programs. Make sure that your CNC machine is compatible with the tool. You can check the supported models in the manual or on the website of the tool. Make sure that you have a proper cable for connecting your PC to your CNC machine. The cable should have a 25-pin D-sub connector on one end for connecting to your PC's serial port, and a 10-pin connector on the other end for connecting to your CNC machine's I/O link port.
Install and run the software: Insert the CD-ROM into your PC's drive and follow the instructions on the screen to install the software. After installation, run the software by clicking on its icon on your desktop or start menu.
Select source and destination models: On the main screen of the software, select the source model from which you want to convert your PMC data. Then select the destination model into which you want to convert your PMC data. Click on [Next] to proceed.
Select eprom types: On the next screen, select the eprom type for both source and destination models. The tool will show you which types are supported for each model. Click on [Next] to proceed.
Select file names: On the next screen, select the file names for saving or loading your PMC data. You can choose to save or load from files on your PC or memory cards inserted into your PC's drive. You can also choose to backup or restore your data using files or memory cards. Click on [Next] to proceed.
Connect cable and turn on power: On the next screen, connect the cable between your PC and CNC machine as instructed. Then turn on the power of both devices and make sure they are communicating properly. Click on [Next] to proceed.
Convert data: On the next screen, click on [Start] to begin converting your PMC data from source model to destination model. The tool will read and write
The data from your eproms using the cable connection. The tool will also check and verify your data before and after conversion, and report any errors or warnings that may occur.
Test data: After conversion is completed, click on [Finish] to exit the software. Then test your converted PMC data on your CNC machine before running any production operations. You should check if everything works as expected and if there are any errors or warnings that need attention.
What are the benefits of using Fanuc PMC Eprom Convert Tool?
Using the Fanuc PMC Eprom Convert Tool can offer you several benefits, such as: It can help you switch PMC to the environment supporting Fanuc 0 series, which is one of the most advanced and versatile CNC systems in the industry. You can enjoy features such as high-speed processing, high-precision control, multi-axis synchronization, graphic display, network communication, and more.
It can help you save time and money by avoiding manual conversion or reprogramming of your PMC data. You can simply use the tool to convert your data from one model to another in a matter of minutes.
It can help you avoid errors or inconsistencies in your PMC data that may affect your CNC performance or quality. The tool can check and verify your data before and after conversion, and alert you of any issues that may need attention.
It can help you backup and restore your PMC data in case of any problems or emergencies. You can easily save or load your data using files on your PC or memory cards.
Tips and tricks for using Fanuc PMC Eprom Convert Tool
To use the Fanuc PMC Eprom Convert Tool effectively and avoid common pitfalls, here are some tips and tricks that you should keep in mind:
Before using the tool, make sure that your PC meets the minimum requirements for running the software. You will need a PC/AT-compatible computer running Microsoft Windows with a CD-ROM drive for installation. It is also recommended that you have FANUC LADDER-IIIC installed on your PC for editing or viewing your ladder programs.
Before using the tool, make sure that your CNC machine is compatible with the tool. The tool supports various Fanuc models, but not all of them. You can check the supported models in the manual or on the website of the tool.
Before using the tool, make sure that you have a proper cable for connecting your PC to your CNC machine. The cable should have a 25-pin D-sub connector on one end for connecting to your PC's serial port, and a 10-pin connector on the other end for connecting to your CNC machine's I/O link port.
Before using the tool, make sure that you backup your original PMC data before conversion. You can use files on your PC or memory cards for backup. This way, you can restore your data in case of any problems or errors during or after conversion.
After using the tool, make sure that you test your converted PMC data on your CNC machine before running any production operations. You should check if everything works as expected and if there are any errors or warnings that need attention.
Conclusion
The Fanuc PMC Eprom Convert Tool is a useful software program that allows you to convert the data stored in your Programmable Machine Control system from one Fanuc model to another. This can help you switch PMC to the environment supporting Fanuc 0 series, which is one of the most popular and versatile CNC systems in the industry. The tool can also save you time and money by avoiding manual conversion or reprogramming of your PMC data. The tool can also check and verify your data
a8ba361960
--- Synchronet 3.20a-Linux NewsLink 1.114