• Change of prt number for mbse

    From Vincent Coen@2:250/1 to All on Fri Feb 4 23:11:21 2022
    Hello All!

    I want to run a second version of mbse on a Raspberry Pi with a USB connected 1Tb Sata HDD as a back up system but more likely to just run the elist software. This way I can having set it up pass on the elist batton to some one
    else as a total system as all it needs is LAN cable to router or hub, HDMI cable for a monitor and if needed a two wire power cable (using a 8 socket)
    for power. Now it can work any where in the world as the power adaptor is one for a Laptop with a voltage range of 100 - 240.
    The benefit of this is that it is very low power requirement although it should
    be connected to a UPS if at all possible (and yes my kit does even if only
    good for around a hour).

    Now as the primary BBS uses the standard port 24554 I would like it to use 24555.

    This way I can tell the Router to port forward 24554 to pass all traffic to the
    primary and if a poll comes in using 24555 to pass traffic to the Pi.

    I cannot see how you set up the port in mbse and I think I have looked every where (unless some one knows otherwise by doing a search of the manual for '24554') as it looks like 24554 is the standard and can't be changed - or can it ?





    Vincent

    --- Mageia Linux v8 X64/Mbse v1.0.7.24/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From deon@3:633/509 to Vincent Coen on Sat Feb 5 10:43:16 2022
    Re: Change of prt number for mbse
    By: Vincent Coen to All on Fri Feb 04 2022 11:11 pm

    This way I can tell the Router to port forward 24554 to pass all traffic to the
    primary and if a poll comes in using 24555 to pass traffic to the Pi.

    I cannot see how you set up the port in mbse and I think I have looked every where (unless some one knows otherwise by doing a search
    of
    the manual for '24554') as it looks like 24554 is the standard and can't be changed - or can it ?

    Why dont you tell your router to forward 24555 to Pi:24554?


    ...лоеп
    --- SBBSecho 3.14-Linux
    * Origin: I'm playing with ANSI+videotex - wanna play too? (3:633/509)
  • From Alan Ianson@1:153/757 to Vincent Coen on Fri Feb 4 16:00:38 2022
    I cannot see how you set up the port in mbse and I think I have looked every where (unless some one knows otherwise by doing a search of the manual for
    '24554') as it looks like 24554 is the standard and can't be changed - or can
    it ?

    When I have wanted to do that I changed the port in /etc/services.

    I'm not sure if there is a way to have one instance of MBSE use port 24554 and another 24555 on the same machine, but if they are on different machines this works.

    --- BBBS/Li6 v4.10 Toy-5
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Vincent Coen@2:250/1 to Alan Ianson on Sat Feb 5 00:19:49 2022
    Hello Alan!

    Friday February 04 2022 16:00, you wrote to me:

    I cannot see how you set up the port in mbse and I think I have
    looked every where (unless some one knows otherwise by doing a
    search of the manual for '24554') as it looks like 24554 is the
    standard and can't be changed - or can it ?

    When I have wanted to do that I changed the port in /etc/services.

    I'm not sure if there is a way to have one instance of MBSE use port
    24554 and another 24555 on the same machine, but if they are on
    different machines this works.

    No, I want two boxes - ok a box and a half running their own copy of mbse where
    the Pi has a special network address and has as its uplink the primary system to get and pass files, netmail and echo traffic to it.

    mbse will not be doing a lot and and web and hopefully the ftp interfaces will not be used.

    If any files arrive on the primary I wil have to have some kind of script to transfer them to the Pi. Just another function to work out but I really hope that is not needed!

    Thanks for the suggestion.


    Vincent

    --- Mageia Linux v8 X64/Mbse v1.0.7.24/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Vincent Coen@2:250/1 to deon on Sat Feb 5 00:25:00 2022
    Hello deon!

    Saturday February 05 2022 10:43, you wrote to me:

    Re: Change of prt number for mbse
    By: Vincent Coen to All on Fri Feb 04 2022 11:11 pm

    This way I can tell the Router to port forward 24554 to pass all
    traffic to the primary and if a poll comes in using 24555 to pass
    traffic to the Pi.

    I cannot see how you set up the port in mbse and I think I have
    looked every where (unless some one knows otherwise by doing a
    search of the manual for '24554') as it looks like 24554 is the
    standard and can't be changed - or can it ?

    Why dont you tell your router to forward 24555 to Pi:24554?

    I do not think the router can handle transfer across ports but I could be wrong
    :)

    If it can, it is a possible solution, thanks for the idea.

    Vincent

    --- Mageia Linux v8 X64/Mbse v1.0.7.24/GoldED+/LNX 1.1.5-b20180707
    * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)
  • From Alan Ianson@1:153/757 to Vincent Coen on Fri Feb 4 17:08:58 2022
    When I have wanted to do that I changed the port in /etc/services.

    I'm not sure if there is a way to have one instance of MBSE use port
    24554 and another 24555 on the same machine, but if they are on
    different machines this works.

    No, I want two boxes - ok a box and a half running their own copy of mbse where the Pi has a special network address and has as its uplink the primary system to get and pass files, netmail and echo traffic to it.

    In that case then yes, you can change the port in /etc/services to 24555 or whatever port you want to use for binkp.

    You'll need to restart inet.d or xinetd if it is already running.

    --- BBBS/Li6 v4.10 Toy-5
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)